H-10 Profiled sheet
Loading the model
3D illustration from the verified model
Configure H-10
H-10
RAL 7016AnthraciteGlossy
Published price for the steel on this label
135MDL/m²
Origin
Thickness
0.45 mm
Across all steels
Published price
90–153MDL/m²
profiled material · accessories and delivery not included
The product, colour, finish and steel you picked carry over into the calculator.
Colour
RAL 7016 · Anthracite
Finish
Glossy
The preview is a guide. The final shade and texture are confirmed on a physical sample from the batch.
Opens an A4 sheet with your selection and the catalogue dimensions, without the rest of the page.
H-10 profiled sheet has 11 channels 10 mm deep at a 107 mm pitch on a 1150 mm sheet that covers 1070 mm. It is an easy profile to handle, for fences, façades and cladding, and can go on a roof from 12°. Sheets run up to 8 m; the steel is 0.32–0.55 mm thick and costs 90–153 MDL/m².
H-10 in section.Dimensioned to the millimetre.
The same dimensions the calculator works with: useful width, overlap and profile height, from the roll-forming line's data sheet.
Catalogue dimensions
- Total width
- 1150mm
- Useful width
- 1070mm
- Side overlap
- 80mm
- Profile height
- 10mm
- Vertical overlap
- 150mm
- Maximum length
- 8m
- Minimum pitch
- 12°
H-10 profiled sheet. Price per m², steel by steel.
The public price per m² of sheet, for every steel in stock: thickness, finish, origin and the colours it comes in. Each H-10 sheet is paid at its full width of 1150 mm and covers 1070 mm.
| Thickness | Finish · colours in stock | MDL/m² |
|---|---|---|
| 0.32 mm | GlossyRAL70163005600590068017 | 90 MDL/m² |
| 0.40 mm | GlossyRAL90067016600580179003 | 98 MDL/m² |
| 0.40 mm | Alu-zincunpainted | 105 MDL/m² |
| 0.45 mm | GlossyRAL801760053005 | 108 MDL/m² |
| 0.45 mm | Alu-zincunpainted | 110 MDL/m² |
| 0.42 mm | TXTRAL70168019 | 115 MDL/m² |
| 0.40 mm | Wood effectOakWalnutGrey | 120 MDL/m² |
| 0.42 mm | Double-paintedRAL7016 | 120 MDL/m² |
| 0.50 mm | TXTRAL70168019 | 120 MDL/m² |
| Thickness | Finish · colours in stock | MDL/m² |
|---|---|---|
| 0.40 mm | Alu-zincunpainted | 120 MDL/m² |
| 0.40 mm | GlossyRAL300560058017 | 130 MDL/m² |
| 0.45 mm | Alu-zincunpainted | 130 MDL/m² |
| 0.42 mm | HI-MATTRAL7016801960053005 | 135 MDL/m² |
| 0.45 mm | GlossyRAL300530119006600580175005900270169003 | 135 MDL/m² |
| 0.50 mm | SNOWMATTRAL7016 | 138 MDL/m² |
| 0.50 mm | V-MATTRAL8015 | 139 MDL/m² |
| 0.40 mm | Wood effectWalnutDarkWhiteGreyBrownAged | 140 MDL/m² |
| 0.50 mm | Alu-zincunpainted | 140 MDL/m² |
| 0.50 mm | HI-MATTRAL7016 | 142 MDL/m² |
| 0.50 mm | V-MATTRAL701670248019600530059005 | 144 MDL/m² |
| 0.50 mm | CrystalRAL7016 | 150 MDL/m² |
| 0.55 mm | V-MATTRAL7016 | 153 MDL/m² |
The same price per m² for H-7, H-8, H-10, H-20, H-35 and H-55: the price is the steel's, only the m² of sheet a job takes differs.
Profiled material, excluding accessories, screws, delivery and fitting. The final price is confirmed in the quote.
H-10 profiled sheet in detail
Between the low profiles and H-20. Its 10 mm channels read more clearly than those of H-7 and H-8, yet the sheet stays light and is simple to cut and fit. H-10 is chosen for fences, for the façades of outbuildings and garages, and for cladding that wants a slightly bolder line than the low profiles.
The width. The sheet carries 11 channels, 10 of them across the useful width: the last one settles over the next sheet's channel, a lap of 80 mm. You pay for 1150 mm a sheet and cover 1070 mm.
As a fence. A 30 m fence 2 m high in H-10 takes 29 sheets of 2 m, 6 003–10 205 MDL for the sheets alone; a metre of fence costs 193–329 MDL. At 1.5 m high, the same fence costs 4 502–7 654 MDL. The sheets are cut to the fence's height, to the centimetre.
Unpainted too. Besides the painted steels, H-10 is also made in bare Alu-zinc, 0.40–0.50 mm, at 105–140 MDL/m²: a practical choice for sheds and outbuildings where colour does not matter.
Questions about H-10 profiled sheet
What is H-10 profiled sheet used for?
For fences, façades and light cladding, where the look and an easy-to-handle sheet matter. On a roof it can go from 12°; for lower pitches or slopes longer than 8 m choose H-20, which is laid from 8° and made up to 11 m.
H-20 profiled sheetHow many H-10 sheets does a 30 m fence take?
29 sheets: each sheet covers 1070 mm, and the last one goes on whole. At 2 m high the sheets cost 6 003–10 205 MDL, depending on the steel; at 1.5 m, 4 502–7 654 MDL.
What a fence costsIs H-10 made in unpainted steel too?
Yes, in Alu-zinc: a metallic coat of aluminium and zinc with no paint. We have it in 0.40–0.50 mm, from Taiwan and Korea, at 105–140 MDL/m². Each one's price is in the table above.
Prices by steel
Same steel.Another profile.
Every profile in the family is made from the same painted coils. What changes is the shape, the useful width and the height.
Sheet beside sheet.H-10, at its useful width.
Each sheet covers 1070 mm and laps 80 mm over the next, in lengths up to 8 m. The calculator counts the sheets on this width.
H-10
from the data sheet
- Useful width
- 1070 mm
- Max. length
- 8 m
- Public price
- 135 MDL/m²