Monterey Metal tile
Loading the model
Approximate shape; the data sheet's dimensions are exact
Configure Monterey
Monterey
RAL 7016AnthraciteGlossy
Published price for the steel on this label
135MDL/m²
Origin
Thickness
0.45 mm
Across all steels
Published price
90–153MDL/m²
profiled material · accessories and delivery not included
The product, colour, finish and steel you picked carry over into the calculator.
Colour
RAL 7016 · Anthracite
Finish
Glossy
The preview is a guide. The final shade and texture are confirmed on a physical sample from the batch.
Opens an A4 sheet with your selection and the catalogue dimensions, without the rest of the page.
Monterey metal tile has narrow 18.4 mm waves between broad flat pans and a 350 mm module. Each sheet covers 1120 mm and is cut to the slope's length, up to 8 m. It is laid from 14°, in 0.32–0.55 mm steel from Taiwan or Korea, at 90–153 MDL/m².
Monterey in section.Dimensioned to the millimetre.
The same dimensions the calculator works with: useful width, overlap and profile height, from the roll-forming line's data sheet.
Catalogue dimensions
- Total width
- 1200mm
- Useful width
- 1120mm
- Side overlap
- 80mm
- Profile height
- 18.4mm
- Module
- 350mm
- Vertical overlap
- 150mm
- Maximum length
- 8m
- Minimum pitch
- 14°
Monterey metal tile. Price per m², steel by steel.
The public price per m² of sheet, for every steel in stock: thickness, finish, origin and the colours it comes in. Each Monterey sheet is paid at its full width of 1200 mm and covers 1120 mm.
| Thickness | Finish · colours in stock | MDL/m² |
|---|---|---|
| 0.32 mm | GlossyRAL70163005600590068017 | 90 MDL/m² |
| 0.40 mm | GlossyRAL90067016600580179003 | 98 MDL/m² |
| 0.45 mm | GlossyRAL801760053005 | 108 MDL/m² |
| 0.42 mm | TXTRAL70168019 | 115 MDL/m² |
| 0.40 mm | Wood effectOakWalnutGrey | 120 MDL/m² |
| 0.42 mm | Double-paintedRAL7016 | 120 MDL/m² |
| 0.50 mm | TXTRAL70168019 | 120 MDL/m² |
| Thickness | Finish · colours in stock | MDL/m² |
|---|---|---|
| 0.40 mm | GlossyRAL300560058017 | 130 MDL/m² |
| 0.42 mm | HI-MATTRAL7016801960053005 | 135 MDL/m² |
| 0.45 mm | GlossyRAL300530119006600580175005900270169003 | 135 MDL/m² |
| 0.50 mm | SNOWMATTRAL7016 | 138 MDL/m² |
| 0.50 mm | V-MATTRAL8015 | 139 MDL/m² |
| 0.40 mm | Wood effectWalnutDarkWhiteGreyBrownAged | 140 MDL/m² |
| 0.50 mm | HI-MATTRAL7016 | 142 MDL/m² |
| 0.50 mm | V-MATTRAL701670248019600530059005 | 144 MDL/m² |
| 0.50 mm | CrystalRAL7016 | 150 MDL/m² |
| 0.55 mm | V-MATTRAL7016 | 153 MDL/m² |
The same price per m² for Bavaria, Bavaria Modular, Monterey and Bango: the price is the steel's, only the m² of sheet a job takes differs.
Profiled material, excluding accessories, screws, delivery and fitting. The final price is confirmed in the quote.
Monterey metal tile in detail
The pattern. Of the tiles in the catalogue, Monterey has the lowest wave: 18.4 mm, against 20 mm on Bavaria and 32 mm on Bango. The flats between the waves are broad and a course comes every 350 mm, so the roof has a quiet, classic tile pattern, suited to a house seen up close from the street.
Sheet length. A Monterey sheet is at most 8 m long. A longer slope takes two sheets, lapped 150 mm vertically; if you want the slope in one piece, Bavaria goes up to 10 m and Bango up to 15 m. On a 100 m² roof with 2 slopes of 5 × 10 m, Monterey takes 18 sheets of 5.06 m: 109.3 m² of steel, 9 837–16 722 MDL.
The width. The sheet is 1200 mm wide and covers 1120 mm, with a side lap of 80 mm, the smallest of our tiles. So on the same roof Monterey takes slightly less steel than Bavaria (109.3 m² against 110.71 m²) and far less than Bango (120.43 m²), at the same price per m².
Questions about Monterey metal tile
Monterey, Bavaria or Bango: which tile should I choose?
All three cost the same per m² of sheet and are laid from 14°. Choose by pattern and by slope: Monterey has 18.4 mm waves and sheets up to 8 m, Bavaria 20 mm ribs and sheets up to 10 m, Bango round 32 mm waves and sheets up to 15 m. On 100 m² of roof, Monterey takes 109.3 m² of steel, Bavaria 110.71 m², Bango 120.43 m².
Every tile profileHow long can a Monterey sheet be?
8 m. A longer slope is made of two sheets, lapped 150 mm vertically. The calculator splits the slope for you and gives the lengths to cut, to the centimetre.
Calculate the roofHow much does Monterey metal tile cost?
90–153 MDL/m² of sheet, depending on the steel: 90–120 MDL/m² in the Taiwanese series (0.32–0.50 mm) and 130–153 MDL/m² in the Korean ones (0.40–0.55 mm). For a 100 m² roof with 2 slopes of 5 × 10 m the sheets cost 9 837–16 722 MDL; accessories, delivery and fitting come on top.
Prices by steel
Same steel.Another profile.
Every profile in the family is made from the same painted coils. What changes is the shape, the useful width and the height.
From eave to ridge.Monterey, in a single sheet.
Formed to the length of the slope, up to 8 m, in 350 mm modules. The calculator cuts the sheets to your slopes.
Monterey
from the data sheet
- Useful width
- 1120 mm
- Max. length
- 8 m
- Public price
- 135 MDL/m²